REFLEX+ Support
![ReFlex+ Supercharger Boost Control Wiring and Software Setup](http://toohighpsi.com/cdn/shop/articles/Boost_Banner_copy_e42e3bcf-d380-425d-9111-8b3bed4a97e2_533x.jpg?v=1715288466)
ReFlex+ Supercharger Boost Control Wiring and S...
With the release of V6.3 Reflex+ Software, boost control for a Supercharger or Turbocharger based off front wheel speed, gear position, and ethanol content is now available for your LTx vehicle...
ReFlex+ Supercharger Boost Control Wiring and S...
With the release of V6.3 Reflex+ Software, boost control for a Supercharger or Turbocharger based off front wheel speed, gear position, and ethanol content is now available for your LTx vehicle...
![ReFlex+ DRY Nitrous Wiring and Setup](http://toohighpsi.com/cdn/shop/articles/Nitrous_Banner_copy_71409742-7213-44ab-8b18-62e3a811e056_533x.jpg?v=1699637260)
ReFlex+ DRY Nitrous Wiring and Setup
Considering nitrous on your GM Gen5 LTx engine equipped with a ReFlex+ port controller? A dry nitrous hit might be just the answer for more power and additional charge cooling! The Dry Nitrous...
ReFlex+ DRY Nitrous Wiring and Setup
Considering nitrous on your GM Gen5 LTx engine equipped with a ReFlex+ port controller? A dry nitrous hit might be just the answer for more power and additional charge cooling! The Dry Nitrous...
![REFLEX+ Auxiliary Fuel Pump PWM Control (returnless)](http://toohighpsi.com/cdn/shop/articles/ReFlex-7_533x.jpg?v=1681441458)
REFLEX+ Auxiliary Fuel Pump PWM Control (return...
Adding PWM control to your auxiliary fuel pump with the MOTIV REFLEX+
REFLEX+ Auxiliary Fuel Pump PWM Control (return...
Adding PWM control to your auxiliary fuel pump with the MOTIV REFLEX+
![ReFlex+ Lambda Input Connection Guide](http://toohighpsi.com/cdn/shop/articles/Lambda_Pigtail-4_circle_533x.jpg?v=1681441573)
ReFlex+ Lambda Input Connection Guide
To connect your WideBand Oxygen Sensor to the Reflex for closed loop control, you"ll first need to find the Input #3 on the ReFlex+ Harness. It is the 3 pin...
ReFlex+ Lambda Input Connection Guide
To connect your WideBand Oxygen Sensor to the Reflex for closed loop control, you"ll first need to find the Input #3 on the ReFlex+ Harness. It is the 3 pin...